Snapguide
STEPS
TOOLS
Plug in speakers bottom right corner where the "output" sign is.

Plug in speakers bottom right corner where the "output" sign is.

Plug in "AV" cables, make sure these cables do not cross. Keep them parallel to each other.

Plug in "AV" cables, make sure these cables do not cross. Keep them parallel to each other.

Plug in silver and black cables, making sure they match up (same order) on the sound board and below the sound board.

Plug in silver and black cables, making sure they match up (same order) on the sound board and below the sound board.

Plug in the power into the sound board.

Plug in the power into the sound board.

Plug the power strip in the outlet on the stage. Make sure you see a red light on the power strip :)!

Plug the power strip in the outlet on the stage. Make sure you see a red light on the power strip :)!

Turn the sound board on.

Turn the sound board on.

Microphone is usually plugged into the #1 slot.

Microphone is usually plugged into the #1 slot.

Check for a red light on the sound board.

Check for a red light on the sound board.

Check for the green lights below the sound board all the way at the bottom.

Check for the green lights below the sound board all the way at the bottom.

Control the sound with the two red buttons on the right of the sound board by moving them up and down.

Control the sound with the two red buttons on the right of the sound board by moving them up and down.

Control the microphone sound with the grey button below the number one by moving it up and down.

Control the microphone sound with the grey button below the number one by moving it up and down.

Also control sound levels with the two light yellow buttons on the far right of the sound board by moving them up and down.

  • 2.0 Speakers
  • 1.0 Microphone
  • 1.0 Stand
  • 1.0 Sound Board
  • 1.0 Power strip
  • 2.0 AV cables