The Conversation (0)
Sign Up
STEPS
TOOLS
Unpack your new 240gb ssd
Unpack your new 16gb Ram memory 2x 8gb
Turn your macbook over and remove all the screws with a plus head screwdriver
Disconnect battery before replacing any parts in your macbook
Once disconnected simply remove old memory and slot in the new memory. First push memory in slot then push down to clip into place
Disconnect the hard drive from motherboard
Use plus head screwdriver to remove screws from bracket holding hard drive in place
Remove bracket on left of hard drive. Bracket on right jus unscrew to release this bracket stays in place
Now lift hard drive out from left and disconnect
Remove torx screws with torx 6 screw driver 2 each side of hard drive and put them in your new 240gb ssd
Now connect your new drive and put in place right edge first
Replace your bracket and tighten all 4 screws to hold your new drive in place
Re connect hard drive cable and battery cable
Replace bottom cover and tighten all screws you now have an upgraded macbook pro free to install whichever version of mac os x you wish