STEPS
TOOLS
Place your spool of thread on the spool holder with thread unthread king away from you. Make sure to put back on your spool cap
Thread the machine by taking the thread around the GUIDE, up to the TENSION guide, then back towards the bobbin winder spindle.
Place the thread through the bobbin from the inside to the outside
Place Bobbin on bobbin winder spindle
Press bobbin winder spindle to the right
Pull the clutch knob out
Hold the thread coming out of the top of the bobbin tightly to the right side of the machine
Use your left hand and press on the foot pedal for 5 seconds
Cut the top thread as close to the bobbin hole as possible
Finish winding the bobbin- pressing on the foot pedal and winding until it is more than half way filled. When done press the bobbin winder spindle back to the left
Press the clutch knob back in
Cut the thread from the spool of thread.
- unthreaded bobbin
- Spool of thread
- Scissors
- Sewing machine