STEPS
TOOLS
Place your spool of thread on the spool holder with thread unthread king away from you. Make sure to put back on your spool cap

Place your spool of thread on the spool holder with thread unthread king away from you. Make sure to put back on your spool cap

Thread the machine by taking the thread around the GUIDE, up to the TENSION guide, then back towards the bobbin winder spindle.

Thread the machine by taking the thread around the GUIDE, up to the TENSION guide, then back towards the bobbin winder spindle.

Place the thread through the bobbin from the inside to the outside

Place the thread through the bobbin from the inside to the outside

Place Bobbin on bobbin winder spindle

Place Bobbin on bobbin winder spindle

Press bobbin winder spindle to the right

Press bobbin winder spindle to the right

Pull the clutch knob out

Pull the clutch knob out

Hold the thread coming out of the top of the bobbin tightly to the right side of the machine

Hold the thread coming out of the top of the bobbin tightly to the right side of the machine

Use your left hand and press on the foot pedal for 5 seconds

Use your left hand and press on the foot pedal for 5 seconds

Cut the top thread as close to the bobbin hole as possible

Cut the top thread as close to the bobbin hole as possible

Finish winding the bobbin- pressing on the foot pedal and winding until it is more than half way filled. When done press the bobbin winder spindle back to the left

Finish winding the bobbin- pressing on the foot pedal and winding until it is more than half way filled. When done press the bobbin winder spindle back to the left

Press the clutch knob back in

Press the clutch knob back in

Cut the thread from the spool of thread.

  • unthreaded bobbin
  • Spool of thread
  • Scissors
  • Sewing machine