How to put a clutch on small engine.

The first thing you need to do is loosen the four bolts (or how ever many other engines may have). Loosen them enough so you can wiggle around the engine.

You now need to align the key way (the little hole that matches the clutch and shaft).

After aligning them you need to slide the clutch onto the shaft. (The key way should still be aligned when sliding clutch on.)

Tighten the set screws with an Allen wrench. The set screws are behind the clutch.

You need to make sure the belt or chain is strait and not bent.

Once the belt is on you need to tighten the bolt on the end of the shaft.

To finish tighten the bolts back down so the engine doesn't move.