Snapguide
STEPS
TOOLS

Choose your wood

Check if the wood is straight or slightly bent on all sides

Check if the wood is straight or slightly bent on all sides

Make a line of where to cut after you know if the wood is straight or not. In my case the wood wasn't straight so I had to make the line in an angle so the wood ends up straight after I cut it.

Make a line of where to cut after you know if the wood is straight or not. In my case the wood wasn't straight so I had to make the line in an angle so the wood ends up straight after I cut it.

Make a V mark so that you know where you should cut and also if you end up making a mistake while cutting you can redirect yourself.

Make a V mark so that you know where you should cut and also if you end up making a mistake while cutting you can redirect yourself.

Start by sawing the starting point to know where to start from. While you cut check if you're cutting straight every few seconds

  • Saw
  • Wood
  • Carpenter Square
  • Pencil
  • C-Clamp