How to make your own stickers
For this guide I'm using painters tape to show you how to make your very own stickers/labels. Just make sure you don't use the really sticky ones to avoid residue if you wish to remove.
21
STEPS
TOOLS
Supplies needed
Cut pc of tape according to size of sticker you wish to create. U can choose to use separate pcs or 1 long pc depending on your letters/design. Remember that the longer the pc the easier it will tear
Place your pc of tape on a clean cutting area or board gently. You want to make it easy to remove without tearing once you cut out your pattern
I chose to do my daughters name all together. This will lift up all in one piece
Cut with x-acto knife. As usual pls be careful when using sharp objects to avoid cutting yourself or damaging cutting area if not using a board
All cut. I will be lifting outer area of pattern
Cut pattern
Use knife to lift from surface
Will be using my daughters laptop for sticker placing
Lift carefully
There it is. Make sure to rub a couple of times gently so it can stick good
Close up
You can even use the leftover pcs to add more to design to your finished product
Left over pcs well used. You're the creator so get creative. Hope you guys like this guide
"Kat"
- Painters tape or other type of tape you wish
- Marking pen or marker
- X-acto knife
- Cutting board or cutting surface
Los Angeles
The Conversation (0)
Sign Up