Snapguide
STEPS
TOOLS

Kracie Popin Cookin DIY Insect Gummies

Full Contents: BLACK Pack Grape Powder Flavor--BLUE Pack Melon Powder Flavor-- SILVER RED Pack Gummy Activator Powder--Mixing Fork,Squeeze Dropper, Insect Mold Tray

Full Contents: BLACK Pack Grape Powder Flavor--BLUE Pack Melon Powder Flavor-- SILVER RED Pack Gummy Activator Powder--Mixing Fork,Squeeze Dropper, Insect Mold Tray

Black=Grape, BLUE= Melon, SILVER=Activator

Black=Grape, BLUE= Melon, SILVER=Activator

Insect Mold Tray

Insect Mold Tray

Cut a tiny corner of BLACK Grape Powder Packet- you want it to be tiny so the powder comes out slow and controllable -

Cut a tiny corner of BLACK Grape Powder Packet- you want it to be tiny so the powder comes out slow and controllable -

Slowly and carefully dump the powder into the molds of your choice

Slowly and carefully dump the powder into the molds of your choice

Do the same with the BLUE Melon a Powder packet until molds are filled-- you will probably have left over powder which if you have another mold you can make some different extra shapes

Do the same with the BLUE Melon a Powder packet until molds are filled-- you will probably have left over powder which if you have another mold you can make some different extra shapes

Use dropper to fill rectangle part of mold to line with water

Use dropper to fill rectangle part of mold to line with water

Add SILVER RED Activator powder to water

Add SILVER RED Activator powder to water

Mix until dissolved

Mix until dissolved

After mixed use squeeze dropper to suck up gummy activator mix

After mixed use squeeze dropper to suck up gummy activator mix

Slowly and carefully drop the activator on top of the powder filled molds

Slowly and carefully drop the activator on top of the powder filled molds

Keep dropping in small amounts until the powder all looks saturated

Keep dropping in small amounts until the powder all looks saturated

Saturated --be careful not to overfill

Saturated --be careful not to overfill

Continue to drop the gummy activator liquid into all powder mold sections

Continue to drop the gummy activator liquid into all powder mold sections

After all parts are saturated , lift container up and look underneath to see if any dry spots -if you see any dry spots, squeeze a couple drops in that area and watch from under to see that it's wet

After all parts are saturated , lift container up and look underneath to see if any dry spots -if you see any dry spots, squeeze a couple drops in that area and watch from under to see that it's wet

Let sit for about 5 minutes and use provided fork or something sharp to loosen edges

Let sit for about 5 minutes and use provided fork or something sharp to loosen edges

After edges are loosened, pry gummies out

After edges are loosened, pry gummies out

We have a beetle and some butterflies

We have a beetle and some butterflies

Yummy Japanese grape and melon bugs -

Yummy Japanese grape and melon bugs -

  • Water
  • Scissors or tiny knife