Add a small trail of glue to about an inch of your bangles. Place the tail of your floss in the glue and begin wrapping around the bangle, over the tail to conceal it.
Continue wrapping until you hit the edge of your glue. Add more glue in inch increments and continue wrapping.
Once you get to the half way point you will add your charm. If you choose not to use a charm, continue to wrap until done.
Slide the charm over the end of your floss.
Pull taunt against the bangles.
Glue on the other side of your charm and wrap tightly.
Now you're finished wrapping you need to cut the tail about a 1/4 inch or a 1/2 inch.
Add a drop of glue to the end and smooth it down.
Now you're done! Let dry for at least 12 hours before using.
- 2.0oz E6000 glue
- Emroidery Floss (multiple colors)
- Charms (optional)
- 2.0 Thin Bangles for each braclet