STEPS
TOOLS
Trace pattern onto tarp (not the side you want to show)
Cut out the outside lines. Don't cut the "pockets" out yet.
Flip the tarp over so the marker lines are face down. Fold the bottom up and make a crease in the tarp so the "pocket" is the height you want. Mine = about 5.5". My "pocket" will have 3 compartments
Unfold crease from last step. Put a piece of duct tape across bottom, with only 1/2 the tape on the tarp.
Fold the tape over length wise to "hem" the bottom.
Cut slits approx 1/2" wide by the height you would like to have your pockets. Fold the tarp up to the crease you made earlier and tape each slit as well as the edges to make pockets.
Tape the pockets down to tarp.
Neck strap - tear off a piece of duct tape approx 24" Fold in 3rds
Fold into 3rds (lengthwise)
Neck strap
Tape one side to back of apron, measure and tape other side to length
Waist strap - tear off a piece of duct tape roughly 14" Fold in 3 rds
Tape waist strap to back side of apron
On other end of waist strap, make a "pull tab". Put a small piece of Velcro on the tab. Put apron on, pull waist strap around waist and put the other side of Velcro on the front of apron
You did it! Bling it up, add more tape, use sharpie markers or....
- Tarp
- Duct tape (your choice of colors and patterns)
- Scissors
- Pattern
- Sharpie (or ball)
- Velcro dot with sticky back
The Conversation (0)
Sign Up