Brit + Co Guides Logo

How to make candy roll party favors

Make Candy Roll Party Favors

19
STEPS
TOOLS
there are many options for making these easy little treat holder, you can even personalize by putting names on them. Flatter candy works best for this project. I used Heath Starbursts, and Stickles.

there are many options for making these easy little treat holder, you can even personalize by putting names on them. Flatter candy works best for this project. I used Heath Starbursts, and Stickles.

Start with a 12x12 sheet of cardstock and trim width to slightly larger than the candy

Start with a 12x12 sheet of cardstock and trim width to slightly larger than the candy

Optionally- run through a paper crimper- trim corners and ink edges

Optionally- run through a paper crimper- trim corners and ink edges

Take double sided tape and run down the center leaving 1-2 inches shorter than the paper strip

Take double sided tape and run down the center leaving 1-2 inches shorter than the paper strip

Cut a length of twine three ties as long as your strip. Put a small dot of hot glue on one end of strip- put one end of twine in the glue, then place the button on top

Cut a length of twine three ties as long as your strip. Put a small dot of hot glue on one end of strip- put one end of twine in the glue, then place the button on top

set down candy on tape leaving space between each candy. Tip make the space the approximate thickness of candy.

set down candy on tape leaving space between each candy. Tip make the space the approximate thickness of candy.

now roll it up, wrap twine around and string around button to close

now roll it up, wrap twine around and string around button to close

  • Twinery Twine
  • Cardstock
  • Double Sided Tape
  • Optional- paper crimper
  • Optional-Ink
  • Optional- chipboard tag
  • Candy