STEPS
TOOLS

What you need.

A key chain. I made this one

Grab the sizers and headphones

Cut half an inch off of the end that plugs into the headphone jack make sure it's enough to make a small loop

This is what it should look like

Grab you're needle with string (I used two inches of string you can use more if you want a stronger hold) {more as in the length of you're wrist to elbow}

(Optional you can add the key chain now or after) Sew threw the end and unite it with the other side. It's okay if you sew threw the headphones... That's the whole point.

Sew 3-4 times threw until string is gone or until you feel it's enough. Then tie a not on the end of the string and cut it off

Get you're keychain if you didn't place it on before. Open the little hook with pliers, hands (if you're strong) in this case sizers are all I have

I opened it and hooked it on

You can make a lot more and make it look more professional too. If you use the same color string and sew it on well.

Vualla!This is what it should look like in the end. Enjoy! Hope you like my tutorial follow for more!
- Pliers
- Sizers
- Old broken headphones
- Key chain accessory
- Needle + thread
The Conversation (0)
Sign Up