STEPS
TOOLS
For this ring you will need a thin wire that is very flexible&a stone of choice. Bc the wire is thin, you can easily cut it with normal scissors, but if you have a special one by all means... Use it!
Choose the finger of choice and wrap wire for size(but don't cut the wire!!). The more times you wrap it, the cooler the effect
If you want, you can shape the wire on a cylinder object
Depending on your wire it may not stay and will look like this. But don't worry! We'll make this bad boy stay
Before you cut, Leave an extra amount of wire behind to wrap around the stone. Depends on how big your stone is, but just to be safe, leave about a foot of extra wire
Bunch wire together. Grab the smallest end and wrap it around the bunch(make sure the ends not sticking downward unless you want to cut yourself)
With the long wire, wrap it around the bunch so it won't awkwardly try to unshape itself. Reshape it circularly if it gets jagged
Now on the part where you first wrapped the short end around the bunch, place the stone there. You can either hot glue it in place or strategically wrap the wire around it and secure it in place
Now wear it!
- Malleable Wire
- Scissors/ flush cutter
- Rock, stone, or bead of choice