How to make a waterslide on minecraft!

Make a pool as big as you want but make sure it's 3 blocks deep.

Using wooden blocks, build this. Make it 5 wide, including the walls. So the actually slide should be 3 wide.

This is how it looks from the side.

Keep on building up!

A side view.

Keep going as far up as you want!

Once you decide to stop, build a platform.

Here is my twist! I like to build a Squid's mouth at the top! Make sure to put in the teeth.

Expand from the back. Try and make the height of the squid's face the same as the width and length.

At the back of the head, build a red wall for the back of the squid's mouth. Leave a hole for the ladder.

Cover up the red wall with another layer of blue wool.

Build a pole with ladders all the way down to the floor. This is how you will get up!

Add a chest to keep your boats in.

I realised the head wasn't square enough, so I made it 1 block higher.

On the left side of the head, build this. This is an eye!

Do the same on the other side.

This is what the head should look like!

Add stone slabs on either side.

Add torches aswell.

Place 3 water buckets at the top!

Oops, the head wasn't square enough from the front! See how I destroyed the second highest row of the head and put the teeth there instead?

Add some squid tentacles!

There are no boats in creative mode on the PE version, so I can't ride this. But grab your boat and have fun!

You should go very quickly in a boat!

Thank you for viewing this guide! It took a while to make, so I would appreciate it if you liked and followed! Be sure to give feedback too! ✌️