Brit + Co Guides Logo
STEPS
TOOLS

So I wanted a stand for aroma sticks, a walked to all nearby shops and found a lot of sticks and none of stands, so I decided to DIY.

Supplies, as you can see, you can change almost any instrument to a hand-one.

Supplies, as you can see, you can change almost any instrument to a hand-one.

Cut a bar to desired length.

Cut a bar to desired length.

Use a sandpaper tool.

Use a sandpaper tool.

Sand a cut side to make it smooth.

Sand a cut side to make it smooth.

Start to carve in the middle V-shape.

Start to carve in the middle V-shape.

Then start to go back and forth with a round shape.

Then start to go back and forth with a round shape.

Drill a hole at approx 45 degrees.

Drill a hole at approx 45 degrees.

Enjoy your creation :)

  • 1.0 Wooden bar or block
  • 1.0 Any saw that is suitable for wood
  • 1.0 Dremel tool or similar
  • 1.0 Drill or similar