Snapguide

How to make a triple single rainbow loom bracelet

Make a Triple Single Rainbow Loom Bracelet

36
STEPS
TOOLS

You will need a rainbow loom, hook, and a c-clip

Make sure the red arrow on the loom is facing away from you and the loom will have u's on all 3 columns

Make sure the red arrow on the loom is facing away from you and the loom will have u's on all 3 columns

Now start putting rubber bands all the way up for all three columns

Now start putting rubber bands all the way up for all three columns

It should look like this.

It should look like this.

Then, put upside down rubber band triangles on the loom. Skip the first 3 in the front

Then, put upside down rubber band triangles on the loom. Skip the first 3 in the front

Keep doing that all the way up

Keep doing that all the way up

Flip the loom around. Now the red arrow should be facing you at the top of the loom

It should look like this at the top

It should look like this at the top

Grab your hook

Now take your hook and take the bottom (left) rubber band and hook it to the loom hook in front of it

Now take your hook and take the bottom (left) rubber band and hook it to the loom hook in front of it

Again hook the bottom rubber band of the middle to the loom hook in front of it

Again hook the bottom rubber band of the middle to the loom hook in front of it

Do the same with the bottom right rubber band

Do the same with the bottom right rubber band

Keep doing that all the way to the top

It should look like this when your done hooking it

It should look like this when your done hooking it

Make sure on both of the sides, the dark blue rubber band is in the middle and and the color of the other rubber band is on the outside. Check the other side

Make sure on both of the sides, the dark blue rubber band is in the middle and and the color of the other rubber band is on the outside. Check the other side

This is the other side.

This is the other side.

At the top, hook the right rubber band to the top middle loom hook

At the top, hook the right rubber band to the top middle loom hook

Do the same step as step 20

Do the same step as step 20

Stick your hook through the rubber bands

Stick your hook through the rubber bands

Get a rubber band and put it on the hook

Get a rubber band and put it on the hook

Pull the hook through the rubber bands and out with the rubber band still on the hook

Pull the hook through the rubber bands and out with the rubber band still on the hook

Put the other half of the rubber band on the hook

Put the other half of the rubber band on the hook

Carefully, pull the bracelet off the loom

Carefully, pull the bracelet off the loom

Almost done!

Almost done!

To complete the full bracelet, turn the loom around so the arrow is faced away from you

Put 5, 6, or 7 rubber bands on the loom. When done, turn the loom around

Put 5, 6, or 7 rubber bands on the loom. When done, turn the loom around

Then, take the bracelet off the hook and put it on the first pin (A.K.A first rubber band too).

Then, take the bracelet off the hook and put it on the first pin (A.K.A first rubber band too).

And start hooking the first rubber band to the front rubber band keep going until the end

And start hooking the first rubber band to the front rubber band keep going until the end

Move the lest hooked rubber band to the loom hook next to it. Then put the C-Clip on that rubber band

Move the lest hooked rubber band to the loom hook next to it. Then put the C-Clip on that rubber band

Last, attach the C-Clip to the other end of the bracelet.

Finished!! Thanx for looking at my tutorial!!

  • 1.0 Rainbow loom
  • 1.0 Rainbow loom hook
  • 1.0 Rainbow loom rubber bands
  • 1.0 C-clip or s-clip