How to make a table

Make a Table

12
STEPS
TOOLS

This is all of the wood you should need.

This is all of the wood you should need.

Cut one piece of wood into the two pieces of wood that are circled, then screw in screws in the places that the screws are circled.

Cut one piece of wood into the two pieces of wood that are circled, then screw in screws in the places that the screws are circled.

It should look something like this

It should look something like this

Put two pieces of wood upright in these places

Put two pieces of wood upright in these places

Screw in three screws into both of the pieces of wood

If you want to use wood glue, then put it on were any two pieces of wood meet

And that's how you make a table

  • 5.0 Wood (2ft x 1 1/2in x 3 1/2in)
  • 2.0 Wood (1 1/2ft x 1 1/2in x 3 1/2in)
  • 1.0 Electric drill/screwdriver
  • 20.0 Screws (2in)
  • 1.0 Saw
  • 1.0 Wood glue (optional)
  • 1.0 Square
  • 1.0 Pencil
  • 1.0 Measuring tape