Step 1: gather material - Get a piece of leather that’s big enough to fit the template on it. Get template from http://highonglue.com/how-to-make-a-small-leather-credit-card-wallet/
Step 2: mark the template - Use an awl to mark the outline and where the holes will be.
Step 3: cut - Cut along the marks using a utility knife, scalpel or head knife.
Step 4: punch holes - Use a 3mm hole punch and mallet (or a rotary punch) and add the 8 holes needed for the credit card slots. Connect the holes by cutting between them.
Step 5: stitching line - With a wing divider, mark the line where the stitching will go
Step 6: stitch spacings - To make sure that your stitching is evenly spaced, use a stitching spacer to mark each stitch before you start sewing.
Step 8: sewing - Sew along the previously marked holes.
Step 9: cut threads - Cut the end of the threads.
Step 10: melt threads - Melt the end of the threads with a lighter.
Step 11: clean-up - Optionally, you can clean up the stitching with the stitching spacer.
- 2.0 Needles
- Stitching Spacer
- Wing divider