Snapguide
STEPS
TOOLS
First, Gather all your suplies you will need 4 jenga blocks , white glue , a ruler and a paintbrush.

First, Gather all your suplies you will need 4 jenga blocks , white glue , a ruler and a paintbrush.

Then get the 4 jenga blocks

Then get the 4 jenga blocks

And arrange them this way.

And arrange them this way.

You may measure your iDevice and measure it to form a gap.

You may measure your iDevice and measure it to form a gap.

Or you may squeeze your device and leave the gap. This is were the device will sit.

Or you may squeeze your device and leave the gap. This is were the device will sit.

You can make a line like this to know where to connect it.

You can make a line like this to know where to connect it.

Then, Using a paintbrush put white glue on the blocks and join them this way.

Then, Using a paintbrush put white glue on the blocks and join them this way.

Do that also on the other side.

Do that also on the other side.

Let it dry for an hour or so.🕛

Or you can light a candle beside it to let it dry faster and better.🔥

Like this

Like this

Ta Da! You now have a DIY iDevice dock!

  • 1.0 White Glue
  • 4.0 Jenga Blocks/ Any blocks
  • 1.0 Paintbrush
  • 12.0in Ruler