Brit + Co Guides Logo
STEPS
TOOLS
Materials to make a wedding planning scrap book for a friend

Materials to make a wedding planning scrap book for a friend

Lay out material and book to cover to measure how much u need, then cut to size, leave an inch overhang

Lay out material and book to cover to measure how much u need, then cut to size, leave an inch overhang

Use small amounts of modpodge and spread a thin even layer across the book, I used an old card

Use small amounts of modpodge and spread a thin even layer across the book, I used an old card

Use a brush to get in to the creases at the spine of the book

Use a brush to get in to the creases at the spine of the book

Smooth out from the centre out and fold the excess material under the book cover, repeat for the spine and back cover of book

Smooth out from the centre out and fold the excess material under the book cover, repeat for the spine and back cover of book

Leave to dry before starting the inside of the book

Spread glue down the book edge and fold over the end of material so it is a straight edge

Spread glue down the book edge and fold over the end of material so it is a straight edge

Do the same for the top and bottom edge, fold in for the corner

Do the same for the top and bottom edge, fold in for the corner

Leave book open to dry and then repeat for back cover

Leave book open to dry and then repeat for back cover

Cut a straight line in the material at edge of spine then glue and fold in

Cut a straight line in the material at edge of spine then glue and fold in

Make a sign if u need one

Make a sign if u need one

Book is dry & finished, can start adding pictures and plans

Book is dry & finished, can start adding pictures and plans

  • Modpodge (for material)
  • Scissors
  • Material of choice
  • Photo album
  • Paint brush and an old card