How to make a ring.

Step one: get at least 6 vaneers, and align them up to your liking.

Step 2: get some glue, so that way you can glue your vaneers.

Step three: put the first vaneer first then put the glue on top, then put glue on the second layer, and vice versa.

Step 4: get a clamp to later clamp down the glued vaneers.

step 5: continue to glue your vaneers until you reach the last one.

Step 6: continue with step five.

step 7: put the glued vaneers on top of each other.

step 8: continue to follow step 7.

Step 9: put the last vaneer on top, then wait until dry.

Step 11: open up the clamp. make sure that you un loosen it first.

Step 12: put the glued vaneers in, and wait for more steps.

Step 11: make sure it is clamped down otherwise it will will fall apart and you would have to restart all of it all over again.

Step12: then take it out, and it should look like this.

Step 13:Cut the veneer into a square shape

Then measure your finger, choose which one you want.

Step 16: clamp down the glued veneers and then get a knife, make sure you don't cut yourself though.

Step 17: Use the knife and cut the chunk of veneers corners off. Make sure to turn it after your done cutting off each corner.

Step 18: after your done that then grab a drill bit and put the ring in it, then grab a drill and sand paper and tape, and then tape down the sandpaper and then sand away! After it will look like this

Step 19: put the drill bit in the drill, the tape down the sandpaper, and your all set to go

then use some sandpaper and sand the ring till it is round

Step 21:After you drilled it then grab some 400 grit paper, and sand around the edges.

step 22: then if you have nicks in your ring then sand them off to make it more of a ring and less of getting your finger caught in the ring.

step 23: then grab a drill again and some cloth and some glue and use the cloth to make the ring covered in glue to give it that nice finish.

Step 24: use the glue and put a few coats on it, and then if you would like just round the edges