How to make a rainbow loom starburst bracelet

Take your Rainbow Loom and make sure the arrow is facing away from you.

Pick one color and go from the left side all the way up to the top.

Like so.....

Finish the first row like this.. Then do the other row from the bottom back to the top.

It should look like this! Push the rubber bands down so you have room on top of them.

Go back to the bottom and take your first starburst color and place it like so.

Place them clockwise, an push them down in the center as you go so it is not bunched up on he middle peg.

First finished starburst!

Put the next rubber band color like so. And follow the pattern like the first.

Your second finished starburst! Continue the process until you have reached the top of the loom.

Now you are ready to put the cap bands on.

Twist the first cap band into a figure 8.

Put one of the loops on top of the other loop to create a double O.

Put the cap band on the first starburst. Do the same process for the middle of all the starbursts until you get to the top.

Once you have finished all the cap bands on the center of the starbursts....

Add one more cap band on the last peg of the middle row of pegs.

Flip the loom around. So the arrow is now facing you.

Now grab your hook!

Take the (purple) rubber band from the first peg as pull it over the cap band on to the middle peg.

This is what it should look like...

Then pull the next rubber band over the middle peg to the next peg counterclockwise. (it should be the same rubber band that was on the peg earlier). It just looks like a loop over the peg.

This is what it looks like.

Do the same process again by grabbing the rubber band an pulling it over, COUNTERCLOCKWISE!!!

Do the same thing for the whole starburst. No bands should be left on the middle peg.

Pull the next rubber band over the middle peg of the next starburst. Hook all the starbursts counterclockwise until you get to the top.

Almost done!!

Take the top (white) band a pull it through the peg and around like so.

Do the same thing on the other side so it looks like this.

Take the bottom rubber band and pull it through the top and hook it on the next peg forward. Keep on going until you reach the top. (This is just showing you the bottom band).

Like so. Go through the peg and grab the bottom band (the band I showed you in the pervious step).

Go diagonal to the last peg. Go back to the bottom of the loom ad loop back up to the top, go diagonal again.

This is what it should look like, comment if you need help!

Put the hook through the peg at the top of the loom catch all the bands!

Put a rubber band on the hook, pull it through so the one rubber band is holding the bracelet on the loom. Then loop it over the hook so there is two O's on the hook.

Like so...

Pull the bracelet off the loom.

Grab your c clip.

Add a c clip to the bracelet side that is attached to the hook.

Another view of what it should look like.

Take the bracelet of the hook carefully!!!

Put the end (without the clip) on your finger(s).

Take another rubber band and fold it under the "black" band.

Grab the loose ends of the "white" band. It will create this...

Do that with a total of 5-6 rubber bands.

Take one end of the bracelet and clip it to the other end.

This is what it should look like.

Ta da!! Comment if you need help!!

Enjoy! :D

If you have a question please DM me on my profile, then message me privately, THANKS!💕

Please make sure to request more guides, I need ideas! Also please check out my other guides, and ❤️ it up! Thanks Makena💕