Snapguide

How to make a rainbow loom single chain bracelet

Make a Rainbow Loom Single Chain Bracelet

STEPS
TOOLS
Start with the red arrow facing away from you

Start with the red arrow facing away from you

Start from the middle pin and stretch your first band to the pin diagonally above it

Start from the middle pin and stretch your first band to the pin diagonally above it

From where you left off, place a band on the pin diagonally above it.

From where you left off, place a band on the pin diagonally above it.

Continue on the pin diagonally above it

Continue on the pin diagonally above it

Do the same thing up until the end of the loom

Do the same thing up until the end of the loom

It should look like this

It should look like this

Flip the loom. The arrows should be facing you

Flip the loom. The arrows should be facing you

Do not loop the first band

Do not loop the first band

Pull back the 2nd band. Loop it up and over to the adjacent pin

Pull back the 2nd band. Loop it up and over to the adjacent pin

Pull back the 3rd band up to the adjacent pin

Pull back the 3rd band up to the adjacent pin

Continue

Continue

It should look like this

It should look like this

Flip the loom over

Flip the loom over

Move the last band to the adjacent pin

Move the last band to the adjacent pin

It should look like this

It should look like this

Snap a C-Clip

Snap a C-Clip

Pull of loom carefully

Pull of loom carefully

It should look like this

It should look like this

Take open band..

Take open band..

Snap the C Clip on

Snap the C Clip on

Finish!

Finish!

  • 1.0 Rainbow Loom Kit
  • 1.0 Hook
  • 25.0 Rubber Bands
  • 1.0 C-Clip