1.create a brainstorm of ideas that you might use

2.Once you've chosen your final design make a template for it

3.Collect your wood for your bored

4.Once you have your wood in place glue it together

5.Put 3 claps on your bored and leave it to dry for 4 hours

6.Once your bored has dried chop the long ends of the wood off

7.Now place your board through the thicknesser

8.Now sand your bored using different types of sandpaper

11.Now sandpaper the rounded edge of your board

12.If you want to make your sanding process faster and better use an electrical sander.Its quicker and also gives you a better result on your board by making it smoother.

13.Then you use a machine that rounds all the edges on your board

14.Then you use sandpaper again to smoothen out the edges

Now you are done!!! Enjoy your pizza :)