Brit + Co Guides Logo
STEPS
TOOLS
Prepare the slender leather.

Prepare the slender leather.

Cut out the leather with a leather cutter.  Be careful not to cut your fingers!

Cut out the leather with a leather cutter. Be careful not to cut your fingers!

Apply oil to the leather edge and polish it with the stick of the wood.

Apply oil to the leather edge and polish it with the stick of the wood.

Prepare a model of the oval.

Prepare a model of the oval.

Wind the slender leather around the model of the oval.

Wind the slender leather around the model of the oval.

Glue the leather together using elastomeric adhesive which is used to glue leather.

Glue the leather together using elastomeric adhesive which is used to glue leather.

Draw a line to show the sewing line.  At this time, draw a line about 0.1 inch away the sewing line from the edge.

Draw a line to show the sewing line. At this time, draw a line about 0.1 inch away the sewing line from the edge.

Pierce it with a hammer on the sewing line.

Pierce it with a hammer on the sewing line.

Prepare the leather of the circle.Use this as a pedestal. Use this as a pedestal.

Prepare the leather of the circle.Use this as a pedestal. Use this as a pedestal.

Sew it with a thread. Use the thread which I pulled with solder.

Sew it with a thread. Use the thread which I pulled with solder.

After the glue has dried, sew it with the wax cord.

After the glue has dried, sew it with the wax cord.

Make a hole to put a pen.

Make a hole to put a pen.

Sew together Ring-Leather with the pedestal.

Sew together Ring-Leather with the pedestal.

You have completed your project.  Congratulations!! http://youtu.be/eqQe4vgMFD4

You have completed your project. Congratulations!! http://youtu.be/eqQe4vgMFD4

The creator of this guide has not included tools