Snapguide
STEPS
TOOLS
Lay a piece of A4 paper on a flat surface.

Lay a piece of A4 paper on a flat surface.

Fold paper in half along the length.

Fold paper in half along the length.

Unfold the piece of paper.

Unfold the piece of paper.

Fold one corner down to the seam.

Fold one corner down to the seam.

Fold other corner down to the seam, making a point at the top.

Fold other corner down to the seam, making a point at the top.

Fold one side of the point down to the seam.

Fold one side of the point down to the seam.

Repeat step 7 on the opposite side.

Repeat step 7 on the opposite side.

Fold the left side onto the right side, using the seam as a guide.

Fold the left side onto the right side, using the seam as a guide.

Make a parallel fold for the right wing about 3 cm from the seam.

Make a parallel fold for the right wing about 3 cm from the seam.

Repeat for the opposite side.

Repeat for the opposite side.

Pull the wings out so that they are horizontal.

Pull the wings out so that they are horizontal.

Bend your corners in but don't crease.

Bend your corners in but don't crease.

Cut the handle vertically, 3 cm from the tail.

Cut the handle vertically, 3 cm from the tail.

Push the cut tab upwards to make a tail.

Push the cut tab upwards to make a tail.

Cut two slits on the wings to make flaps.

Cut two slits on the wings to make flaps.

Repeat on other side.

Repeat on other side.

  • 1.0 Paper A4
  • 1.0 Scissors
  • 1.0 Stapler