How to make a pair of swedish goggles

Acquire a pair of Swedish Goggles. They come in packs that include all the supplies needed. They also come in hundreds of different styles and colors.

First, loop the nose piece string through one side of the goggles.

Second, push both ends of the string through the nose piece.

Third, push one end of the string through the other goggle and tie a knot with the two ends. Make sure the string is the right length to fit your nose. This is the most difficult part.

Next, slide one end of the goggle strap through one of the goggles.

Repeat the process on the other side.

Pull the ends so that they are even on both sides of the goggles so that you can adjust the size easier.

Then, loop one end of the goggle strap in, then out, then back into the tightening connector.

Repeat the process on the opposite side of the connector with the remaining length of goggle strap.

Tighten the straps as needed so that they are the right size for your head. The goggles should fit firmly enough on the face so that they do not leak water, but not so firmly that they hurt.

You have now made a brand new pair of Swedish Goggles! Put on your new goggles and try them out!