STEPS
TOOLS
Collect your tools
Measure a square for your dish
Cut the sheet metal into your square
Measure on the diagonal to find the centre
Put a centre punch in the middle
Use the compass to measure a perfect circle for you dish
Use tin snips to cut your circle
File your dish to get rid of any sharp bits, hold it in a vise
Drill a hole through the centre
Use your tinmans mallet to mole your dish
You have finished your dish!
File the ends of your flat bar
Bend your flat bar into a scroll template
Bend it until you have a little handle shape, If you bend it too far your dish won't fit and it won't work
Make sure you have it no bigger or around the size of this one
Measure diagonal to find the centre
Measure 2.5 to make a bend
Drill through the centre of your flat bar
Bend the edges of your stand using a ballbein hammer
Put your pop rivet in place
Use the pop rivet gun to pop rivet your candle holder in place
Now you have a mini candle holder!
- 1.0 Scriber
- 1.0 Square
- 1.0 Metal ruler
- 1.0 Centre punch
- 1.0 Ballbein hammer
- 1.0 Hacksaw
- 1.0 Vice
- 1.0 Drill bit
- 1.0 Gilotine
- 1.0 Divider
- 1.0 Tin snips
- 1.0 File
- 1.0 Pop rivet gun
- 1.0 Tin mans mallet
- 1.0 Sheet metal
- 1.0 Flat bar
The Conversation (0)
Sign Up