Brit + Co Guides Logo
STEPS
TOOLS

search through your junk jewelry or buttons to find pieces to impress in the Shrink Film.

search through your junk jewelry or buttons to find pieces to impress in the Shrink Film.

you can also use other items, look around your house to see what you might find.

you can also use other items, look around your house to see what you might find.

some items make a better design than others. a few things to keep in mind: metal works best, deeply impressed designs transfer better, very intricate, tiny patterns may not work.

some items make a better design than others. a few things to keep in mind: metal works best, deeply impressed designs transfer better, very intricate, tiny patterns may not work.

these pieces made nice designs when pressed into the hot Shrink Film. they are flat, have large interesting designs and are metal.

these pieces made nice designs when pressed into the hot Shrink Film. they are flat, have large interesting designs and are metal.

these pieces did not work as well: they were plastic, domed, or had patterns that were not etched deeply enough.

these pieces did not work as well: they were plastic, domed, or had patterns that were not etched deeply enough.

you can experiment to find pieces that press well or play with placement on the Film. but if you don't like the pattern you get, just reheat the Shrink Plastic 4-5 minutes to "clear" it and try again.

to give you some idea of items that stamped a nice impression on the Shrink Film, here are a few photos of finished charms and the item used to stamp them.  metal earring: had open, interesting design

to give you some idea of items that stamped a nice impression on the Shrink Film, here are a few photos of finished charms and the item used to stamp them. metal earring: had open, interesting design

junk jewelry pin: prongs and missing stones only added to the design detail

junk jewelry pin: prongs and missing stones only added to the design detail

metal buttons: surfaces were flat, design was simple and deep enough to stamp a clear impression.

metal buttons: surfaces were flat, design was simple and deep enough to stamp a clear impression.

the bottom of my kitchen spider created an interesting design.

the bottom of my kitchen spider created an interesting design.

a vintage ink block made some great designs.

a vintage ink block made some great designs.

to make charms, start by punching circles from Gold & Silver Shrink Film, and punch hole at top. be sure you use at least a 1/4" hole Punch as hole will shrink considerably.

to make charms, start by punching circles from Gold & Silver Shrink Film, and punch hole at top. be sure you use at least a 1/4" hole Punch as hole will shrink considerably.

the size of the circle you use will be determined by the approximate size of the item you are impressing in it, unless you are using a very large item to stamp the Shrink Film. see chart in photo.

the size of the circle you use will be determined by the approximate size of the item you are impressing in it, unless you are using a very large item to stamp the Shrink Film. see chart in photo.

place punched Shrink Film on baking sheet, i used a silpat sheet to line mine as i wanted the texture of it to transfer to the back of my charms. you can also line with parchment. bake 1 at a time.

place punched Shrink Film on baking sheet, i used a silpat sheet to line mine as i wanted the texture of it to transfer to the back of my charms. you can also line with parchment. bake 1 at a time.

bake according to package directions. when piece has shrunk, remove the tray from the oven and immediately position your junk jewelry, button, etc over the charm. work quickly to complete next steps.

bake according to package directions. when piece has shrunk, remove the tray from the oven and immediately position your junk jewelry, button, etc over the charm. work quickly to complete next steps.

cover with an old hot pad.

cover with an old hot pad.

then press down firmly all over the piece to transfer the pattern completely to the hot Shrink Film. the charm will cool of fast, so work quickly. reheat if charm cools before you can impress.

then press down firmly all over the piece to transfer the pattern completely to the hot Shrink Film. the charm will cool of fast, so work quickly. reheat if charm cools before you can impress.

charm stamped with pattern from junk jewelry piece.

charm stamped with pattern from junk jewelry piece.

here is a look at the back of the charm, it has picked up the pattern from the silpat sheet. set charms aside to cool completely.

here is a look at the back of the charm, it has picked up the pattern from the silpat sheet. set charms aside to cool completely.

to antique the charms and bring out the designs, squeeze a few drops of Surfacez Black Ink onto pad of ColorBox Tip.

to antique the charms and bring out the designs, squeeze a few drops of Surfacez Black Ink onto pad of ColorBox Tip.

use a dabbing motion to press Ink into the stamped design on your charm.

use a dabbing motion to press Ink into the stamped design on your charm.

i've inked the bottom half of this charm, note how the ink is deep in the impressions, not just run across the top of the charm as in the top left of this charm.

i've inked the bottom half of this charm, note how the ink is deep in the impressions, not just run across the top of the charm as in the top left of this charm.

next use damp magic eraser to remove ink from top surface of charm. do not press hard, you want to leave the Ink in the impressions.

next use damp magic eraser to remove ink from top surface of charm. do not press hard, you want to leave the Ink in the impressions.

the surface Ink has been removed from the bottom half of the charm.

the surface Ink has been removed from the bottom half of the charm.

next, rub charm in a paper towel to remove excess ink or residue from magic eraser.

next, rub charm in a paper towel to remove excess ink or residue from magic eraser.

antiqued charm.

antiqued charm.

don't forget to do the back of the charms if you baked on a liner that transferred a pattern.

don't forget to do the back of the charms if you baked on a liner that transferred a pattern.

use chain and jump rings that match the color of your finished charms.

use chain and jump rings that match the color of your finished charms.

lay out the charms in the order you want them on your bracelet. I found it looked more interesting to not just alternate gold and silver. i tried to mix up sizes and patterns.

lay out the charms in the order you want them on your bracelet. I found it looked more interesting to not just alternate gold and silver. i tried to mix up sizes and patterns.

measure out desired length of chain for your bracelet - remember finding will add a bit to the overall length. then begin attaching charms using jump rings that match color of charm.

measure out desired length of chain for your bracelet - remember finding will add a bit to the overall length. then begin attaching charms using jump rings that match color of charm.

be sure you are attaching charms to the same "side" of the chain, as shown here. i placed my charms along the bottom. also make sure they all face the same way. spacing will depend on your chain.

be sure you are attaching charms to the same "side" of the chain, as shown here. i placed my charms along the bottom. also make sure they all face the same way. spacing will depend on your chain.

once all charms have been attached, add closure finding to each end to complete.

once all charms have been attached, add closure finding to each end to complete.

finished charm bracelet.

finished charm bracelet.

experiment with other items to impress to create unique charms for more Gold and Silver Shrink Film projects. these films are PERFECT for earrings, as they give the look of metal without the weight.

i hope you enjoyed this project... you can find more great project ideas on the GRAFIX WEBSITE www.grafixarts.com you can find me at www.tamisanders.com thanks for viewing! tami

  • Grafix: Gold and Silver Shrink Film
  • Clearsnap: ColorBox Stylus & Tips
  • Clearsnap: Surfacez Refill Bottle - Black
  • Junk Jewelry, Metal Buttons, Hardware, etc
  • 6 mm Gold & Silver Jump Rings
  • 7"-8" of Chain for Bracelet
  • Closure Finding
  • 3", 2 1/2" and 2" Circle Punch
  • Hole Punch
  • Jewelry Pliers
  • Baking Sheet
  • Silpat Sheet or Parchment Paper
  • Hot Pad
  • Magic Eraser
  • Paper Towels