How to make a "lanyard" out of plastic lacing!

This is the EASIEST thing ever to make! All it takes is a little patience!

1094
STEPS
TOOLS

Before I start I want to say I have no clue why they are called lanyards, SO this is not what they are supposed to be! I made mine a bracelet! Do WHATEVER with yours!

Gather supplies! Obviously I am on an airplane so I can not bring scissors, BUT before I left I cut everything! \u2708\u2702

Gather supplies! Obviously I am on an airplane so I can not bring scissors, BUT before I left I cut everything! ✈✂

Cut 4 long pieces of plastic lacing! (Make sure that they are long enough to make whatever you wish!)

Cut 4 long pieces of plastic lacing! (Make sure that they are long enough to make whatever you wish!)

Tie a not at the end of the plastic lacing

Tie a not at the end of the plastic lacing

Place a piece if plastic lacing on each side

Place a piece if plastic lacing on each side

Bring the top piece over like a rainbow

Bring the top piece over like a rainbow

Bring the bottom piece up like a rainbow

Bring the bottom piece up like a rainbow

Pull the right piece through the piece that was on the bottom at the start

Pull the right piece through the piece that was on the bottom at the start

Do the same on the other side and repeat and repeat and repeat! It does not matter which side you do it on from then on. NOTE: I am sure there are other ways on how to do this- this is the easiest! 😃

NOTE: Keep pulling all sides of the plastic lacing on the lanyard to make it tight when you finish each "lace"

Here is the finished product! This is a different one I made since they take FOREVER! So enjoy your lanyard creation!

TA-DA!!!!\ud83d\ude03\ud83d\ude03\ud83d\ude03\ud83d\ude03\ud83d\ude03

TA-DA!!!!😃😃😃😃😃

  • Plastic lacing
  • Scissors
  • Patience! 😄