Snapguide
STEPS
TOOLS

You will need a C-Clip, Rainbow loom, and a hook

First, on the side of the rainbow loom, make a figure 8 by twisting the rubber band. and put it on 2 of the pegs

First, on the side of the rainbow loom, make a figure 8 by twisting the rubber band. and put it on 2 of the pegs

Then add 2 more rubber bands on top of it

Then add 2 more rubber bands on top of it

Then take your hook and take the bottom rubber band which was the 8 and put it over the 2 rubber bands

Then take your hook and take the bottom rubber band which was the 8 and put it over the 2 rubber bands

Add another rubber band on top

Add another rubber band on top

Then hook the bottom rubber band on top of the other two rubber bands

Then hook the bottom rubber band on top of the other two rubber bands

Repeat these steps to desired length

It should look like this when you are done

It should look like this when you are done

Then pinch the last 2 rubber bands and pull it off

Then pinch the last 2 rubber bands and pull it off

This is when you pulled it off. Then take out those 2 loose rubber bands

This is when you pulled it off. Then take out those 2 loose rubber bands

Then attach the rubber band (the rubber band is the one right after the 2 loose rubber bands) with a C-clip or S-clip

Then attach the rubber band (the rubber band is the one right after the 2 loose rubber bands) with a C-clip or S-clip

Attach the other end with the c-clip

Finished!! Please comment, like and follow! Thanx!

Finished!! Please comment, like and follow! Thanx!

  • 1.0 1 Rainbow Loom
  • 1.0 Rainbow loom hook
  • 1.0 Rubber band