Brit + Co Guides Logo

How to make a charging cellphone holder

Make a Charging Cellphone Holder

11
STEPS
TOOLS
Gather all of your supplies together.

Gather all of your supplies together.

Draw a line going slightly above the middle section of the bottle.

Draw a line going slightly above the middle section of the bottle.

Draw around the information label.

Draw around the information label.

Cut from the top and then cut along the line.

Cut from the top and then cut along the line.

Place your connector on top of the bottle.

Place your connector on top of the bottle.

Grab your sharpie and trace your charger.

Grab your sharpie and trace your charger.

With your scissors, cut out the square.

With your scissors, cut out the square.

Grab your selected wrapping paper.

Grab your selected wrapping paper.

Cut a piece of wrapping paper that can completely cover the bottle.

Cut a piece of wrapping paper that can completely cover the bottle.

Glue it together and cut off the loose hangings.

Glue it together and cut off the loose hangings.

Put your connector through the hole and plug it in.

Put your connector through the hole and plug it in.

It should look something like this. Enjoy!

  • 1.0 Sharpie
  • 1.0 Lotion or shampoo bottle
  • 1.0 wrapping paper
  • 1.0 Glue stick
  • 1.0 Scissors
  • 1.0 Your phone charger