STEPS
TOOLS
Gather suppied im using hair band but if you want to use a clip then you only need one of the small peices of ribbion that you will see on step 5
This is what the finnished bow will look like
To get about that sized bow you need 4x as much ribbon
About this size
Get a square of ribboin and cut it in half for the middle of the bow
Lets start
Get a lighter and dab the sides to prevent and get rid of strings
Plug in the hot glue gun and lets get gluing
Put glue down the middle of the ribbon sorry for the bad photo its hard to glue and take a picture
Fold both sides to meet in the middle
Pinch the sides up to form a bump btw sorry again for the pics
Flip to the other side of the bow
Once again pinch the side up and glue them up
Repeat steps 9-18 on the other peice of ribbion it should be the same size
Those are the two finshed one
Grab the two peices and glue them together only in the middle
It should look like this
Now get one of the smaller peices and glue it in the middle
Like this
Flip it around
Glue the hair band down
Get the other small peice and cover it to hold the hair band in place
Almost done
Since its split at the edges we will have to glue
Put a dab of glue
Don't glue all the way down
Repeat on the other side and now your done
Clean off the hot glue strings
Yay
- Ribbon
- Rubber band or clip
- Lighter
- Hot glue gun
The Conversation (0)
Sign Up