How to hang a sconce without nails
When you do not want to pierce the ceiling, you use a special glue. Clean and without holes! Just have to be careful with the stucco. It may not bear the weight!
348
STEPS
TOOLS
This is what we want to hang from the ceiling, but without nails!
First we have to separate the metal bar from the lamp.
Removing the screws...
Done!
Now we take the glue tube
and spread in the part that will stick to the ceiling.
Using a spatula to spread the glue or an old scoop of ice cream!
Be sure to cover the entire area.
Put the piece in place and press it firmly for a couple of minutes.
And now You wait 24 hours... tic tac tic tac.
Now you have to cut the ends of the two wires
So they look like this...
They take off the socket because the sconce alredy has one.
Drop wires
Fit the wires in the junction.
Use a small screwdriver
The wires of the sconce too
Note that the green wire (ground wire) will not connect to any of the two wires of the sconce.
Screw the sconce to the metal plate no the ceiling
Secure the lampshade
Find a nice lamp,
And lights on!
- 1.0 Tube of glue
- 1.0 Spatula
- 1.0 Lamp
- 1.0 Sconce
- 1.0 Screwdriver
- 1.0 Pliers