Snapguide
STEPS
TOOLS
Here's my iPhone 4. Now I'll change the back glass. TURN YOUR PHONE OFF.

Here's my iPhone 4. Now I'll change the back glass. TURN YOUR PHONE OFF.

Firstly I'll take my simcard out(this is not necesscary though) and the simcard tray

Firstly I'll take my simcard out(this is not necesscary though) and the simcard tray

I'm taking the simcard out

I'm taking the simcard out

Do not put the simcard tray back on(remember taking your simcard out is not necessary, but turn your phone off)

Do not put the simcard tray back on(remember taking your simcard out is not necessary, but turn your phone off)

Take your screwdriver. When you bought the back glass you probably got a screwdriver, then use that or else you will damage the screws. If not buy one.

Take your screwdriver. When you bought the back glass you probably got a screwdriver, then use that or else you will damage the screws. If not buy one.

Now see if your screwdriver fits the screws. If not take another one

Now see if your screwdriver fits the screws. If not take another one

Now screw both of the bottom screws off

Now screw both of the bottom screws off

Place the screws a secure place. Make sure you know which one, belong on which side.

Place the screws a secure place. Make sure you know which one, belong on which side.

Now screw the other screw off

Now screw the other screw off

Now both of them are off

Now both of them are off

Place your thumb like mine and slide the iPhone back glass "up", do it carefully.

Place your thumb like mine and slide the iPhone back glass "up", do it carefully.

When you slide it up there should be a opening like this. If you still can't take it up, slide it a bit more

When you slide it up there should be a opening like this. If you still can't take it up, slide it a bit more

When you have slided the back glass up, it should be possible to take it off

When you have slided the back glass up, it should be possible to take it off

Now if you have a new back glass(because the old is broken) you can place that on, but I don't have a new one, so I'll place my old back on.

Put the back glass up at the top. The same place as you slided it off

Put the back glass up at the top. The same place as you slided it off

Place it like this

Place it like this

Now slide the back glass down to place, carefully.

Now slide the back glass down to place, carefully.

And your iPhone backglass is now renewed

And your iPhone backglass is now renewed

Now you need to screw it all back together

Now you need to screw it all back together

Now you can put the simcard back

Now you can put the simcard back

And you can turn your phone on!

And you can turn your phone on!

Sorry for my bad english(I'm not english). Hope you understood it though. Follow on twitter: @neklasd

  • 1.0 iPhone
  • 1.0 iPhone back glass
  • 1.0 Screwdriver