Brit + Co Guides Logo
STEPS
TOOLS
Create a Brainstorm of 8 designs and state what you like about them

Create a Brainstorm of 8 designs and state what you like about them

Choose your favourite one out of all of them and make a final design

Create your Template. Draw one side first then cut it out. Trace that side on the other side so it is symmetrical

Select the wood you want to make your board out of

Select the wood you want to make your board out of

Glue your wood together with P.V.A glue

Glue your wood together with P.V.A glue

Clamp your wood together so it can dry. It will be ready the next day

Clamp your wood together so it can dry. It will be ready the next day

Sand your board

Sand your board

Cut your end of your board so it looks like...

Cut your end of your board so it looks like...

This!

This!

Sand the end of your board so there isn't any pointy edges

Sand the end of your board so there isn't any pointy edges

Draw your template design on to your board

Draw your template design on to your board

Using a Band Saw cut one side on your board. Don't forget to wear safety glasses at all times

Using a Band Saw cut one side on your board. Don't forget to wear safety glasses at all times

Sand the edges so they are rounded.

Sand the edges so they are rounded.

Round and Sand  the tighter gaps with a bobbing sander.

Round and Sand the tighter gaps with a bobbing sander.

Clamp so you can sand it without it moving everywhere.

Clamp so you can sand it without it moving everywhere.

Curve the edges with a router

Curve the edges with a router

Sand the board so there isn't any sharp edges

Sand the board so there isn't any sharp edges

Using a mm ruler draw a circle at the end of your board so it looks like...

Using a mm ruler draw a circle at the end of your board so it looks like...

This!! The hole in the middle of the circle is made by pushing a

This!! The hole in the middle of the circle is made by pushing a

After drilling the hole with a drill the hole should look like this

After drilling the hole with a drill the hole should look like this

After Sanding it to make sure there isn't any sharp edges it should look like this

After Sanding it to make sure there isn't any sharp edges it should look like this

Now pour a little bit of OLIVE OIL onto your board

Now pour a little bit of OLIVE OIL onto your board

The olive oil is used so: the board will not burn and the pizza doesn't get contaminated

The olive oil is used so: the board will not burn and the pizza doesn't get contaminated

One side done

One side done

Flipping over to the next side after the oil dries otherwise dust will stick to the oil

Flipping over to the next side after the oil dries otherwise dust will stick to the oil

One side

One side

And the other

And the other

After doing one coat of oil steel wool your board

After doing one coat of oil steel wool your board

Wait for it to dry

Wait for it to dry

Add a third coat of oil but DO NOT use the steel wool

Add a third coat of oil but DO NOT use the steel wool

And you are...

And you are...

...

...

Finished!!

Finished!!

  • A4 Paper
  • Wood
  • P.V.A Glue
  • Clamps
  • Sand Paper
  • Olive oil
  • Old cloth
  • Safety goggles
  • Apron
  • Disc Sander
  • Band Saw
  • Bobbing Sander
  • Medium Speed Drill
  • Electric sliding saw
  • Chisel