How to create a hexa fishtale bracelet

Create a Hexa Fishtale Bracelet

22
STEPS
TOOLS

Step 1: Choose your 7 colors of rubber bands.

Step 1: Choose your 7 colors of rubber bands.

Step 2: Count out 10 bands of each color.

Step 2: Count out 10 bands of each color.

Step 3: Put 1 of 1st color of four fingers. (Excluding pinky)

Step 3: Put 1 of 1st color of four fingers. (Excluding pinky)

Step 4: Twist each corner on each finger. (Should get tight and look like ^this^)

Step 4: Twist each corner on each finger. (Should get tight and look like ^this^)

Step 5: Put 1 of same color band on fingers above the 1st band.

Step 5: Put 1 of same color band on fingers above the 1st band.

Step 6: From bottom pull bands over top from all corners.

Step 6: From bottom pull bands over top from all corners.

Step 7: Continue adding bands 1 at a time pulling corners up and over between each band.

Step 7: Continue adding bands 1 at a time pulling corners up and over between each band.

Step 8: Once at desired length, collect all 4 corners onto 1 finger.

Step 8: Once at desired length, collect all 4 corners onto 1 finger.

Step 9: Get "S" or "C" clip and put all 4 corners onto it.

Step 9: Get "S" or "C" clip and put all 4 corners onto it.

Step 10: Pull bracelet off fingers carefully.

Step 10: Pull bracelet off fingers carefully.

Step 11: Connect other end of bracelet with the same clip to complete your project! \ud83e\udd17\ud83e\udd17

Step 11: Connect other end of bracelet with the same clip to complete your project! πŸ€—πŸ€—

  • 10.0 7 different colors of small bands (10 of ea.)
  • 1.0 "S" or "C" connector clip
  • 365.0 Not required: Music 🎢🎢