Hello, my name is Ben Glunt and I'm going to show you how to change a tire.
The car was jacked up ahead of time do to the tire that was already flat. Usually you can jack the car up behind the tire under the door on a joint weld.
Make sure your tire has the recommended tire pressure in it. It says it on the side wall of the tire on how many psi ( pounds per square inch) should be in the tire.
The air is put in your valve stem which is the rubber/ metal thing that sticks out of your rim most cars are 35psi and some trucks are 80psi.
I had the car jacked up on the one A-arm since its an older car
I put the on the other rim and tire after I anti-seized the studs for the lug nuts.
After your done and make sure ever thing is tight lower the car slowly and put your tools in the trunk or garage.
This is how you change your tire.
- Car jack
- 4way wrench
- Screw driver
- The other tire and rim
The Conversation (0)