Brit + Co Guides Logo

How to build a rubbermaid vertical shed

Build a Rubbermaid Vertical Shed

56
STEPS
TOOLS

Position the floor so that the doors will have room to swing open.

Position the floor so that the doors will have room to swing open.

Punch out the holes where the bottoms of the doors will be placed.

Punch out the holes where the bottoms of the doors will be placed.

Drill a 1/8" pilot hole at a slight angle.

Drill a 1/8" pilot hole at a slight angle.

Add some soap to the dove tails to make sliding into place easier.

Add some soap to the dove tails to make sliding into place easier.

Slide dove tails into place.

Slide dove tails into place.

Push wall down into the slots until it clicks.

Push wall down into the slots until it clicks.

Put the roof on top and position the support rod by the well in the roof and the front holes at the top of the left and right walls.

Put the roof on top and position the support rod by the well in the roof and the front holes at the top of the left and right walls.

Screw the roof into the back walls through the pilot holes drilled in Step 5.

Screw the roof into the back walls through the pilot holes drilled in Step 5.

Secure the roof to the left and right walls.

Secure the roof to the left and right walls.

Secure the doorway into the base on the left and right sides.

Secure the doorway into the base on the left and right sides.

Drill pilot holes in the 4 places along the bottom.

Drill pilot holes in the 4 places along the bottom.

Secure the base of the walls in the 4 places along the bottom.

Secure the base of the walls in the 4 places along the bottom.

Slide the latch into place.

Slide the latch into place.

Drill pilot holes for the door knob.

Drill pilot holes for the door knob.

Secure the doorknob.

Secure the doorknob.

All done! Now go get a key or combination lock :)

The creator of this guide has not included tools